Gas Cooler U Tube Cleaned Offshore

Immediate mobilisation saves offshore platform £1000’s

The ‘hairpin’ tube Gas Cooler on a North Sea oil platform was blocked by a break down of ferrules (material inserts within the tube ends) in the first pass of the heat exchanger. The contract was time critical as the platform was losing 8000 barrels a day.

  • Blocked 14.83mm I.D. hairpin tubes within a shell and tube exchanger, with high pressure gas on the tube side and sea water on the shell, located on a North Sea offshore platform.
  • Modifications to the tube bundle included additional ferrules to the inlet quadrant to help reduce tube end erosion and erosion around the tube expansions.
  • Increased back pressure on the tube side, believed to be caused by a break down of the ferrules had blocked tubes.
  • Degraded insert particles were being caught in 5 micron filters downstream.
  • Platform production capacity was severely affected by these blockages.
  • Once the header was removed Tube Tech inspected the tubes, confirming 937mm long ferrules had clogged the tube bores. Broken ferrule sections had lodged in the 'U' bends of the heat exchanger, while others had folded back on themselves but remained adhered.
  • Bottom half tubes were severely affected with 94 tubes completely blocked, effectively limiting the unit to 5% flow.
  • Tube Tech used their SafeFlex system to safely drill the straight and then the tubes were then DarTTed around all hairpin bends to remove any remaining debris.

“We originally thought the contract would take 48 hours and were pleased that the contract was completed in less than 24 hours. Tube Tech’s ability to mobilise so quickly was a huge bonus to the client.”

Related Case Studies

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Praesent sit amet nisl nec elit dictum tincidunt quis vitae nunc. Duis aliquam malesuada erat, quis consectetur justo varius vitae. Praesent faucibus est quis ipsum vestibulum finibus. Maecenas et ex id nibh imperdiet imperdiet. Morbi bibendum vel erat sit amet elementum.

Crude Oil Heaters Cleaned Offshore

Read More

Heat Exchangers (Crude Train) Cleaned Back to Bare Metal within a refinery

Read More

Crude Train U-Tubes Polished in Five Hours

Read More

Unblocking U-Tube for a gas liquefaction plant in Abu Dhabi

Read More

Free Quote - 24 Hour Response

Send us your enquiry below and a Tube Tech International specialist will respond within 24 hours. Regardless of your industry sector or severity of fouling, we will have a solution to deliver guaranteed results.